Universal-audio Apollo 16 User Manual download pdf (Page 29)

Apollo 16 Hardware Manual Speciﬁcations 29

Speciﬁcations

All speciﬁcations are typical performance unless otherwise noted, tested under the following conditions: 48 kHz

internal sample rate, 24-bit sample depth, 20 kHz measurement bandwidth, with balanced output.

SYSTEM

I/O Complement

Analog Line Inputs 16

Analog Line Outputs 16

Analog Monitor Outputs Two (one stereo pair)

AES/EBU One stereo input, one stereo output

FireWire 800 (IEEE 1394b) Dual ports

Thunderbolt (via Thunderbolt Option Card) Dual ports

Word Clock One input, one output

MADI Optical Ports One input, one output

A/D – D/A Conversion

Supported Sample Rates (kHz) 44.1, 48, 88.2, 96, 176.4, 192

A/D Bits Per Sample 24

Simultaneous A/D conversion 16 channels

Simultaneous D/A conversion 18 channels

Analog Round-Trip Latency 1.1 milliseconds @ 96 kHz sample rate

Analog Round-Trip Latency with up to four serial

UAD Powered Plug-Ins via Console application

1.1 milliseconds @ 96 kHz sample rate

ANALOG I/O

Analog Inputs 1 – 16

Dynamic Range 119.25 dB (A–weighting)

Signal-to-Noise Ratio 119.25 dB (A–weighting)

Total Harmonic Distortion + Noise -112 dB @ -1 dBFS

Common-Mode Rejection Ratio -75 dB

Frequency Response 20 Hz – 20 kHz, ±0.05 dB

Channel Separation (Crosstalk) -138 dB

Input Impedance 10 Kilohms

Gain Settings +4 dBu or -10 dBV (reference level is selectable in pairs)

Max Input Voltage (Reference Level @ +4 dBu, Balanced) 20.22 dBu (18 dBV, 7.94 VRMS, 0 dBFS)

Max Input Voltage (Reference Level @ -10 dBV, Balanced) 14.22 dBu (12 dBV, 3.98 VRMS, 0 dBFS)

Max Input Voltage (Reference Level @ -10 dBV, Single-Ended) 8.22 dBu (6 dBV, 2 VRMS, 0 dBFS)

Stereo Level Balance ±0.01 dB

Connector Type Two Female DB25, Tascam wiring

(continued)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 41 42

No comments

Universal-audio Apollo 16 User Manual Page 29